Ground source -
heat pumps
Basic models 2-6,5 kW and 3-52 kW with great system concept
How to reduce your heating costs down to 50%. With a proofed annual efficiency of 5.81, the M-TEC ground source heat pump is one of the best in it´s class. Trust it too, on ground source heat pumps as energy supplier for generations.
All heat pumps can be used with E-Smart. This included energy management system takes care on the best communication of photovoltaic, battery storage, e-mobility, and much more.
Energy source - GROUND
Wether earth, air or ground water – with the solutions from M-TEC you can use natural resources in an efficient and sustainable way. Our ground source heat pumps are ready to use for usual heat sources.
Deep drilling geothermal probe
In geothermal probes, a frost-proofed liquied, the brine, circulates through a plastic pipe in a closed circuit. A geothermal probe requires only a small plot area.
From a depth of 10 meters, the temperature is almost constant throughout the whole year and thus independet of seasonal fluctuations. Therefore a geothermal probe is very efficient at low temperatures, especially in the winter season.
Ground collectors
The ground on which your home is placed, is a free and inexhaustible source of energy. By sun, rain and geothermal energy your garden is charged like an energy storage, again and again. It´s also available year after year for free.
Flat plate collectors, similar to underfloor heating, work with a horizontal pipe system in the ground, which is laid in snakes at a depth of about 1.3 m. The required collector area depends on the heat demand of your building and the heat conductivity of the soil. For an average single-family house new constructed, it´s about one and a half times the heating surface.
Ground collectors - direct evaporating
The ground on which your home is placed, is a free and inexhaustible source of energy. By sun, rain and geothermal energy your garden is charged like an energy storage, again and again. It´s also available year after year for free. Flat plate collectors, similar to underfloor heating, work with a horizontal pipe system in the ground, which is laid in snakes at a depth of about 1.3 m. The required collector area depends on the heat demand of your building and the heat conductivity of the soil. For an average single-family house new constructed, it´s about one and a half times the heating surface.
Direct evaporating technology is 20% more efficient than conventional surface area.
Photovoltaic-thermal collectors (PVT)
Photovoltaic-thermal collectors (PVT) are PV-modules and solarthermal collectors combined in one housing.
One collector parts converts the sun exposure into electricity, during the other part is using the created heat as a heat source for the heat pump.
This heat source is mostly combined with other heat sources like ground- or air source.
The smallest modulating ground source heat pump inclusive source-mixer for PVT systems
In just 0,25m³ are no longer only the heat pump and the energy-managementsystem E-Smart included. Additionally the circulation pumps, a DHW changeover valve, the expansion vessels, the manometers, a booster heater and a source mixer for PVT systems.
This unique heat pump can do passive and active cooling as well. A real powerpackage, which can be placed in the smallest corners or under stairs.
Our ground source heat pump models
The best heat pump ist just as good as the system concept. With this development, M-TEC always orientates itself towards the optimum! The results are heating systems with highest efficiencies, which are permanently confirmed by independed institutes.
Heat pump 3-52 kW
This ground source heat pump guarantees highest efficiencies, developed by the heat pump-pioneer M-TEC with around 4 decades of experience. Up to 20% higher efficiency due to intelligent power control.
Heat pump 2-6,5 kW
The model is cheaper to purchase, but offers all M-TEC product benefits. With the dimensions of 700 x 600 x 565 mm, the unit is using also the smallest room efficiently.
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationThe linked up heat pump
Use with E-Smart an efficient and forward-looking control technology.
Compared to conventional heating system, this results in extremely low operating costs and the possibility of using this system for heating and cooling as well as the preperation of domestic hot water.
Even systems such as solar thermal, photovoltaic and smart home systems work hand in hand with our heat pump control. This results in a maximum of self-consumption of the free photovoltaic power.
